Photoelectric sensors with laser and red-light are widely used in all areas of industrial automation. A clean, dust-free and dry environment is usually essential for the proper operation of photoeyes, however, they can be the best choice in many dirty and harsh applications. Examples of this are raw steel production in steel mills and further metallurgical processes down to casting and hot-rolling.
Photoelectric sensors are especially useful in these environments thanks to their long sensing distance and their ability to detect objects independent of their material.
Most photoelectric sensors are approved to work in ambient temperatures of 55 to 60 °C. The maximum temperature range of these sensors is most often limited by the specifications of the optical components of the sensor, like the laser-diodes, but by taking certain precautions photoelectric sensors can provide optimal use in much hotter applications.
Maximize the distance
In steel production many parts of the process are accompanied by high ambient temperatures. Liquid steel and iron have temperatures from 1400 to 1536 °C. Material temperature during continuous casting and hot-rolling are lower but still between 650 and 1250°C.
The impact of heat emission on the sensors can be reduced significantly by placing the sensor as far from the target object as possible, something you can’t do with inductive sensors which have a short range. Very often the remote mounting will allow the sensor to operate at room temperature.
If you intend to detect quite small objects with high precision, the maximum distance for the installation might be limited. For this purpose chemical resistant glass fibers are suitable and can handle temperatures up to 250 °C. These pre-fabricated fiber optic assemblies can be easily attached to the sensor. The sensor itself can be mounted on a cooler and protected place.
Detect Glowing Metals
If you want to reliably detect red-hot or white glowing steel parts with temperatures beyond 700 °C, you won’t be able to use standard laser or red-light sensors. Red-hot steel emits light at the same wavelength that it is used by photoelectric sensors. This can interfere with the function of the sensor. In such applications you need to use sensors which operate based on infrared light.
At many locations in the steel production process, the extensive heat is only temporary. In a hot rolling mill, a slab runs through a rougher mill multiple times before it continues to a multi-stage finishing mill stand to be rolled to the final thickness. After that the metal strip runs into the coiler to be winded up.
This process runs in sequence, and the glowing material is only present at each stage of production for a short time. Until a new slab runs out of the reheating furnace, temperatures normalize.
Standard sensors can work in these conditions, but you do run the risk of even temporary temperature hikes causing sensor failure and then dreaded downtime. To protect photoelectric sensors against temporary overheating, you can use a protective enclosure. These can provide mechanical and thermal protection to the sensors which often have plastic bodies. Additional protection can be achieved when a heat resistant sleeve is used around the cable.
Photoelectric sensors do have their limits and are not suitable for all applications, even when precautions are taken. Ask yourself these questions when deciding if they can be the right solution for your high temperature applications.
- Which distance between the hot object and sensor can be realized?
- What is the maximum temperature at this location?
- How long will the sensor be exposed to the highest heat levels during normal operation and at breakdown?